<b id="5rd3b"><span id="5rd3b"></span></b>
    <b id="5rd3b"><ruby id="5rd3b"></ruby></b>

    Language: Chinese line English

    CNC System

    • XC809M series drilling and tapping multi-functional multi-purpose NUMERICAL control system
    XC809M series drilling and tapping multi-functional multi-purpose NUMERICAL control system

    XC809M series drilling and tapping multi-functional multi-purpose NUMERICAL control system

    • Product description: XC809M series drilling and tapping multi-functional multi-purpose NUMERICAL control system
    • INQUIRY
    XC809M series drilling and tapping multi-functional multi-purpose NUMERICAL control system is a new generation of numerical control system developed by our company. Support boring, tapping, drilling and automatic feeding. Using 32-bit high-performance microprocessor, real-time multi-task control technology and hardware interpolation technology, full linkage, 0.001mm interpolation accuracy, the highest speed of 30 m/min. It is the best choice for CNC drilling machine, special machine tool, automatic equipment, feeding robot and so on.
    XC809M series software and hardware features:
    ★ Based on 32-bit microprocessor, full linkage, 0.001mm interpolation accuracy, maximum speed of 30 m/min, support direction + pulse and orthogonal pulse.
    ★ Can run 3 programs at the same time (1 main program, 2 secondary programs) convenient processing, feeding, blanking program writing.
    ★ 7 inch color widescreen LCD, resolution 800X480, Windows interface style. Equipped with 8 soft function keys, the operation is easy to learn. Provide parameter classification, alarm log, system diagnosis and other rich display interface, convenient debugging and maintenance.
    International standard G instruction, compatible with FANUC system instruction.
    ★40 kinds of G instruction, support drilling cycle, tapping cycle.
    Parts program full screen editing, built-in 512M massive program space, can store 500 parts program.
    ★ With USB interface, support U disk file reading and writing, data backup.
    ★ Input 24(expandable to 96) points, output 24(expandable to 96) points (custom), flexible and convenient.
    ★ Chinese/English operation interface, complete help information, more convenient operation.
    ★ The system adopts pre-interpolation acceleration and deceleration control.
    ★ Support multi-level operation rights, convenient device management, with time-limited system lock function.
    Support self programming knife library, flexible use of a variety of knife library.
    ★ Support third-party software G code files.
    Technical specifications
    The basic function
    Number of control axes 1 to 6 axes (X, Y, Z, A, B, C)
    1 axis :XC809MA, 2 axis :XC809MB, 3 axis :XC809MC,
    4 axis :XC809MD, 5 axis :XC809ME, 6 axis :XC809MF
    Number of linkage axes Full linkage
    Knife library support, need to edit knife library code
    Spindle 2 analog spindles, of which spindle 1 can use digital spindle (occupy one digital axis)
    Spindle monitoring
    Minimum instruction unit 0.001 mm
    Maximum instruction ±99999999 x minimum instruction unit
    Fast feed speed 30,000mm/min
    Fast feed multiplier F0, 25%, 50%, 75%,100%
    Pulse mode 1: Direction + pulse
    2: Orthogonal pulse (if the driver supports, recommended, stronger interference)
    Maximum frequency 100Khz,200Khz,500KHz can be set.
    (500KHz can only be achieved with all axis orthogonal output modes)
    Feed rate is 0 ~ 150%
    Electronic gear ratio 1 to 65535
    Automatic acceleration and deceleration
    Positioning G00 (linear interpolation positioning)
    Interpolation line (G01), arc (G02/G03/G12), spiral interpolation
    Automatic return to reference point (G28)
    LCD 7-inch TFT LCD screen, resolution 800X480
    Software keys 8
    Step through x1, x10, x100
    Communication port Usb port
    External handwheel interface available
    I/O interface 24/24(expandable to 96/96)
    Pause (seconds) Yes
    The quasi-stop state has
    There must have stopped
    Storage trip check yes
    MDI operation has support for multi-stage operation
    Reset is
    Skip switches have
    A single segment run has
    The program protection switch has
    The self-diagnosis function has
    Emergency stop there
    Power supply single-phase AC220V+10%-15%, 50Hz±1Hz
    Coordinate system Machine coordinate system (G53), workpiece coordinate system (G92, G54 ~ G59), local coordinate system (G52), coordinate system plane specified
    The automatic coordinate system is set to
    The decimal input has
    Auxiliary function
    Auxiliary function M2 digit, M code custom, manual /MDI/ automatic control spindle forward, reverse, stop; Control coolant start and stop; Control lubrication start and stop etc
    Main function
    Spindle function double spindle
    Digital spindle spindle 1 support, occupy a digital axis (Z axis does not support), the speed is more stable.
    Threading support
    Spindle analog output has, double spindle
    Function of cutting tool
    Tool function support automatic tool change, support points in the center of the tool, three fixed center of the tool
    Tool compensation memory -9999.999 ~ 9999.999, 99
    The cutter compensates each axis length compensates
    Edit operation
    Edit function parameters, diagnostic bitwise input, program editing, MDI multi-program execution
    Storage capacity: 512 MB
    Number of stored programs 500
    Program name display Chinese, English, numbers, combination
    Program line lookup has
    Skip optional program segments have
    Program switch has
    According to
    Display language Chinese, English
    Processing time and number of parts are shown
    Spindle speed, M/S instruction has
    Host size (mm)
    Dimensions (length × width × thickness) 235×158×80
    Opening size (l × W) 370×228

    LATEST NEWS

    CONTACT US

    Contact:

    Phone: 13812080602

    Tel: 0510-85586857

    Email: xcmcu@126.com

    Add:

    yyds永远的神blued在线观看资源一个好点的电影网站,每天可以获取上万用户浏览,<中文字幕乱码一区久久麻豆樱花>A91人妻中文字幕无码专区色欲A最近最新中文字幕大全手机在线观看完全免费、无...